Zadi Standard Series Door Lock

This Zade standard series compartment lock is common to many mobile vehicles built in the U.K. such as the Swift Autotrail and European marks such as Hymer Mobile. These door catches are popular with vehicle converters because of the ease of use, ease of fitting and ease of use for the end customer. That alongside a sleek smooth shape that blends onto the vehicle body.

The Zadi standard series lock operates on a robust 90-degree twist action.

To operate: put the key into the barrel, turn the key and the external handle pops out towards you making it obvious the door is now unlocked. A 1/4 turn on the handle and the door catch is released. To lock the door latch; it is simply a case of twisting the locking catch and pushing the handle back flush into the mounting with a turn of the key it is locked and secure.

The fitting of this lock is simple and takes seconds. Anybody can do this. You open your existing latch which reveals 2 external screws. Remove these. Undo the M12 bolt on the rear of the lock holding the catch on and remove the entire unit. To refit the new lock pass it through the door hole taking care to keep the supplied neoprene gasket in place. Using suitable screws (not supplied) secure the barrel in place, then fit the rear latch washer and finally the M12 bolt and tighten. That’s it you’re done! So easy even us here at CamperHappy.co.uk have fitted them!

By fitting the cranked latch either rear or front facing and with the help of some M12 spacers / washers (not supplied) you can configure this latch to work with door thicknesses between 22 and 44mm! You could make a strike plate for this lock that is cranked or even slot the outer door frame if it is deeper to accept the latch. You can adapt the lock to work how you would like.

If you know your key number, we can look through our stock to try to match yours and if you buy multiple locks, we can key them alike to order. But please call us to request this.

The lock comes complete with a random keyed Zadi barrel and matching pair of keys. It is possible to reuse your old barrel if its serviceable. This has an advantage if your caravan compartments are all keyed alike. so, you do not need to carry additional keys with you. To do this a special Zadi extraction key is needed, or there are instructional videos readily available on YOUTUBE to do this without.

Zadi are the largest established manufacturer of caravan and motorhome door and compartment locks in Europe. From their base in Italy, they supply many of the manufacturers across the U.K. and this is a direct replacement part if you are having problems with your lock.

Buying from us could not be easier, we accept PAYPAL alongside all major payment methods via this secure website but equally you can ring or email us if you prefer.